All the non needed items like radio, heat A/C, carpet padding, tar like sound proofing has been trashed.
The under dash stuff was all trashed, and the MSD Digital 6 Plus box is mounted
on the shelf behind the glove box door.
I had previously used aluminum to isolate the trunk area from the passenger area to pass NHRA
tech inspection with a fuel cell and battery in the trunk. I decided to use a foam insulator to level
off the area where the lower seat was. I used a product called "Great Stuff", since it is VERY light
weight, and is sprayed in from a arisol can. Since it expands 50% over a 24 hour period, I sprayed
it in layers. After 2 thin layers, it was time to put the aluminum top in place. I had drilled several holes
in it to allow easy access to filling low spots. After spraying the foam in the holes, I placed cement
blocks on top of it, so the expanding would not raise the aluminum, and only fill under it level.
Here it is leveled, and ready for some carpet.
Next Week it gets Carpeted