RE: [SI-LIST] : Decoupling caps selection

From: Zabinski, Patrick J. ([email protected])
Date: Mon Oct 30 2000 - 12:06:48 PST

• Next message: Doug Hopperstad: "[SI-LIST] : RE: SSTL"
• Previous message: Michael Nudelman: "Re: [SI-LIST] : Decoupling caps selection"
• Maybe in reply to: Dilpreet Saini: "[SI-LIST] : Decoupling caps selection"
• Next in thread: [email protected]: "RE: [SI-LIST] : Decoupling caps selection"

Stefan,

I'm not sure what the manufacturability is in terms of assembly,
but the short-wide caps run about 20-30 times higher in cost!

Pat

>
>
> Hi,
>
> thanks for this interesting thread.
>
> What's the word on manufacturability of 0508 (short-wide) vs.
> 0805 caps
> (long-narrow). I heard a horror story from 10 years ago about
> solder splashes
> causing shorts between the terminals. Is this still an issue
> in today's
> manufacturing processes?
>
> Thanks,
>
> Stefan Ludwig
> SiByte, Inc.
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Doug Hopperstad: "[SI-LIST] : RE: SSTL"
• Previous message: Michael Nudelman: "Re: [SI-LIST] : Decoupling caps selection"
• Maybe in reply to: Dilpreet Saini: "[SI-LIST] : Decoupling caps selection"
• Next in thread: [email protected]: "RE: [SI-LIST] : Decoupling caps selection"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:54 PDT