[SI-LIST] : Decoupling caps selection

About this list Date view Thread view Subject view Author view

From: Dilpreet Saini ([email protected])
Date: Fri Oct 27 2000 - 15:14:48 PDT


Hi all,
        I was wondering if the selection of the decoupling capacitor of a circuit is MAINLY governed by the edge rates of the switching signals or by the frequency of their switching. I believe the answer is later cause all the documentation that I have seen on the dcoupling cap selection so far do not have any mention of the edge rates. Most of the capacitor manufacturer have "Impedance Vs Frequency" charts in their specs/catalogs. I am assuming that the Frequency that they are referring to is the frequency of operation of the circuit. Any ideas/comments are greatly appreciated.

Dilpreet

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:52 PDT