[SI-LIST] : Fwd: Probing power plane with analyser.

About this list Date view Thread view Subject view Author view

From: Barry Ma ([email protected])
Date: Thu Sep 28 2000 - 09:01:43 PDT

------- Start of forwarded message -------
To: "'EMC - PSTC Forum'" <[email protected]>
Cc: Roman Seifert <[email protected]>
Subject: Probing power plane with analyser.
From: "Cameron O'phee" <O'[email protected]>
Date: Thu, 28 Sep 2000 11:59:24 +1100

Hello All,

I have been asked by one of our design engineers if I can measure the RF
signature on the 3v plane on one of our PCB designs. The purpose of this is
to compare it to proposed changes for cost reduction, ie removal of bypass
caps. I would assume I need some sort of CDN but I have no designs for this
application. Does anyone have any ideas on how I can safely probe a 3v DC
power rail with an EMC analyser (HP8591E)?


Cameron O'Phee.
EMC & Safety Precompliance.
Aristocrat Technologies Australia.

Telephone : +61 2 9697 4420
Facsimile : +61 2 9663 1412
Mobile : 0418 464 016

Best Regards,
Barry Ma <[email protected]>
ANRITSU www.anritsu.com
Morgan Hill, CA 95037
Tel. 408-778-2000 x 4465

Free Unlimited Internet Access! Try it now!


**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:36 PDT