From: Sean Murray ([email protected])
Date: Mon Aug 21 2000 - 16:01:20 PDT
We are seeing quite a bit of requests for high speed differential
pair boards; edge-2-edge, broadside, you name it. Recently I received one
where the two complements were none of the above, but rather were joined at
a central point. They are not close enough to be edge to edge, nor do they
even run in the same general vicinity; rather they run to a central point.
Any idea what this is and how to measure, specify to make sure that
the diff impedance is what is required (zod=100 ohms, z=50).
Regards,
Sean Murray
General Manager
M&M Specialties Inc.
1236 W. Southern Ave. #106
Tempe, AZ. 85282-4518
Phone: (480) 858-0393 x105
Cell: (602) 684-7859
Fax: (480) 858-1882
Email: [email protected]
WWW.mmspec.com
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:19 PDT