[SI-LIST] : differential pair separation

About this list Date view Thread view Subject view Author view

From: David Butler ([email protected])
Date: Mon Aug 14 2000 - 13:03:10 PDT


Hello,
I'm doing SI testing on differential pairs and got stuck on how to determine
the crosstalk noise margin. I trying to get the separation between diff
pairs. The tool that I'm using will simulate this case but how much is too
much. The data sheet has Vid as 0.1 v min and 0.6 max.

Thanks

David E. Butler
Datacube Inc.

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:19 PDT