From: Bill Owsley ([email protected])
Date: Tue Aug 08 2000 - 13:52:39 PDT
I've heard about this one... the cops call it the modus operandi or
something like that...
and the other is obvious - when your car is gone...
But someone is gonna come back with a lame description of the board
manufacturers need these things, little Cu dots like measles, to make the
etching work out better and pressing the lams together too. And if you
keep the measles far enough from your signals - no contagion (effects).
ps. there are other uses if one gets creative, that help control EMI.
At 08:12 AM 07/31/2000 -0700, Ray Anderson wrote:
>OK, I'll bite. Educate me, what is a thieving pattern,
>and an auto-thiever ????
> > Does anyone out there have a tool or reference
> > that would allow one to calculate the effects of
> > thieving patterns on signal integrity and EMC.
> > I am trying to come up with appropriate rule sets
> > for driving an auto-thiever utility.
> > Thanks for the help.
> > MG
>**** To unsubscribe from si-list or si-list-digest: send e-mail to
>[email protected] In the BODY of message put: UNSUBSCRIBE
>si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
>si-list archives are accessible at http://www.qsl.net/wb6tpu
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:59 PST