Re: [SI-LIST] : extraction tools

From: Scott McMorrow ([email protected])
Date: Mon Jun 19 2000 - 15:33:35 PDT

• Next message: Haller, Robert: "[SI-LIST] : SI Position at Cereva Networks"
• Previous message: Ming Yin: "[SI-LIST] : extraction tools"
• In reply to: Ming Yin: "[SI-LIST] : extraction tools"
• Next in thread: Chris Heard: "Re: [SI-LIST] : extraction tools"

Ming,

You might try ApsimRLGC from Applied Simulation Technology.

http://www.apsimtech.com/products/ApsimRLGC/RLGCdata.htm

regards,

scott

Ming Yin wrote:

> Hi all,
>
> I'm looking for the tools which can extract the RLC parameters for
> package, such as vias, leads and wirebond. I knew that Ansoft has some
> tools for extraction. But is there any other tools existing? Any
> suggestion?
>
> Ming
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****

--
Scott McMorrow
Principal Engineer
SiQual, Signal Quality Engineering
18735 SW Boones Ferry Road
Tualatin, OR  97062-3090
(503) 885-1231
http://www.siqual.com
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at  http://www.qsl.net/wb6tpu
****

• Next message: Haller, Robert: "[SI-LIST] : SI Position at Cereva Networks"
• Previous message: Ming Yin: "[SI-LIST] : extraction tools"
• In reply to: Ming Yin: "[SI-LIST] : extraction tools"
• Next in thread: Chris Heard: "Re: [SI-LIST] : extraction tools"

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:40 PST