Re: [SI-LIST] : Calculating Trace Inductance

Craig Clewell ([email protected])
Wed, 25 Nov 1998 09:21:56 -0500

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Craig Clewell: "Re: [SI-LIST] : Backplane connectors for Fibre Channel"
Previous message: Chang_Ie_Hwaa: "[SI-LIST] : Slew rate"
Maybe in reply to: Douglas McKean: "[SI-LIST] : Calculating Trace Inductance"

Doug,
GOTO UltraCad's web site (www.ultracad.com). They have a calculator that =
will give you the inductance based on the geometry of the trace.=20
Hope this helps!

Craig Clewell
Electrical Engineer
FCI Electronics Inc.
25 Grumbacher Road
York, PA. 17402
ph: 717-767-7982
e-mail: [email protected]
fax: 717-767-7991

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

Next message: Craig Clewell: "Re: [SI-LIST] : Backplane connectors for Fibre Channel"
Previous message: Chang_Ie_Hwaa: "[SI-LIST] : Slew rate"
Maybe in reply to: Douglas McKean: "[SI-LIST] : Calculating Trace Inductance"