[SI-LIST] : Slew rate

Chang_Ie_Hwaa ([email protected])
Tue, 24 Nov 1998 21:51:59 -0500

Hi all,
I have two question regarding slew rate of output buffer. The 1st is
about the IBIS nodel for buffer behavior. The IBIS model use the DC I/V
curve and the unloaded slew rate of buffer to model the buffer behavior.
Will it give correct slew rate for all loading condition? Any trick
needed to generate model? The 2nd question is about the slew rate SPEC
for some standard. e.g. PCI required the slew rate is between 1.5V/ns to
4V/ns under the prescribed loading condition. what if the SPEC do'nt be
met?
Any help will be appreciated!
Regards,
I.-H. chang 11/25 '98

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****