Australian Bandplans - 2016 3cm Band
======================================
Band Limits: 10.0-10.5 GHz
Primary Service: RADIOLOCATION 10.0-10.5 GHz
Secondary Service: METEOROLOGICAL SATELLITE 10.0-10.025 GHz
Secondary Service: AMATEUR 10.0-10.5 GHz
Secondary Service: AMATEUR SATELLITE 10.45-10.5 GHz
Access: Advanced licensees only
10000.000 - 10160.000 ALL MODES
10160.000 - 10360.000 WIDEBAND MODES
10160.000 - 10180.000 Channel 1: Data
10180.000 - 10200.000 Channel 2: Voice
10200.000 - 10220.000 Channel 3: ATV
10220.000 - 10240.000 Channel 4: Data
10240.000 - 10260.000 Channel 5: Voice
10260.000 - 10280.000 Channel 6: ATV
10280.000 - 10300.000 Channel 7: Data
10300.000 - 10320.000 Channel 8: Voice
10320.000 - 10340.000 Channel 9: ATV
10340.000 - 10360.000 Channel 10: Simplex, any mode
10360.000 - 10368.000 ALL MODES
10368.000 - 10370.000 NARROW BAND MODES
10368.000 - 10368.100 EME only
10368.100 - 10368.400 CW / SSB
10368.100 Calling frequency: national primary
10368.200 Calling frequency: national secondary
10368.220 - 10368.240 Digital DX modes
10368.400 - 10368.600 Beacons
10368.600 - 10370.000 Experimental
10370.000 - 10372.000 FM SIMPLEX
10372.000 - 10380.000 ALL MODES
10380.000 - 10440.000 WIDEBAND MODES
10380.000 - 10400.000 Channel 11: Data
10400.000 - 10420.000 Channel 12: Voice
10420.000 - 10440.000 Channel 13: ATV
10440.000 - 10448.000 ALL MODES
10448.000 - 10450.000 NARROW BAND MODES (Possible future use)
10450.000 - 10500.000 AMATEUR SATELLITES
Beacons
Beacon Frequencies are allocated on a call area basis.
eg VK1: 10368.410-10368.419, VK2: 13680.420-13680.429 etc.
Beacon spacing is 2KHz.
FM Simplex Voice & Data
FM Simplex voice channels are 100KHz spacing.
Wideband Duplex
These segments are intended mainly for wideband duplex links with an
offset of 70MHz. Suggested use of each 20MHz segment s:
Data Segments: 1MHz channel spacing, excluding upper and lower segment edges.
Voice Segments: 100KHz channel spacing
ATV Segments: Single channel at centre of segment using FM ATV with
+/- 9MHz deviation.
SSB Call Channels
Be aware that 10368.100 is a national call channel. Contact
should be established on this channel and then the operators should
QSY.
|
