SPI
[Core]

The SPI subsystem allows the MAKE Controller to communicate with peripheral devices via SPI. More...

Functions
int	Spi_Configure (int channel, int bits, int clockDivider, int delayBeforeSPCK, int delayBetweenTransfers)
	Configure the SPI channel.
int	Spi_ReadWriteBlock (int channel, unsigned char *buffer, int count)
	Read/Write a block of data via SPI.

---

Detailed Description

The SPI subsystem allows the MAKE Controller to communicate with peripheral devices via SPI.

See EEPROM module for an example use.

---

Function Documentation

int Spi_Configure	(	int	channel,
		int	bits,
		int	clockDivider,
		int	delayBeforeSPCK,
		int	delayBetweenTransfers
	)

Configure the SPI channel.

This function locks the I/O lines associated with the SPI channel so they cannot be used by another device on the same lines.

Parameters:

	channel	An integer specifying the SPI channel to configure.
	bits	An integer specifying the number of bits to transfer (8-16).
	clockDivider	An integer specifying the desired divider from the serial clock (0 - 255).
	delayBeforeSPCK	An integer specifying the delay, in ms, before the clock starts (0 - 255).
	delayBetweenTransfers	An integer specifying how long, in ms, to wait between transfers (0 - 255).

Returns:

0 on success.

Definition at line 104 of file spi.c.

int Spi_ReadWriteBlock	(	int	channel,
		unsigned char *	buffer,
		int	count
	)

Read/Write a block of data via SPI.

Parameters:

	channel	An integer specifying the device to communicate with.
	buffer	A pointer to the buffer to read to, or write from.
	count	An integer specifying the length in bytes of the buffer to read/write.

Returns:

0 on success.

Definition at line 142 of file spi.c.