AGW PACKET
ENGINE + TSTHWIN
x PACKET 1200 (under Windows) with
Audio Card
- Software needed:
WINSOCK Ver.2 for Win95 (WS2SETUP.EXE);
AGWPE (AGWPE.ZIP); (AGW
PACKET ENGINE 's Home Page on http://www.raag.org/sv2agw/
);
DRIVER (DRIVERS.ZIP, SYSTEM.ZIP);
TF2AGW DLL (TF2AGW11.ZIP);
TSTHWIN VER. 2.21B (TSHW221B.EXE); (TSTHWIN 's Home Page on http://www.r-j.it/servizi/hp/ik1gkj/ik1gkj.htm);
- Install and run AGW PACKET ENGINE as described
in "HOW TO INSTALL AGW PACKET ENGINE"
page;
- Now install TF2AGW' DLL: unzip the file and copy
TF2AGW.DLL under C:\WINDOWS\SYSTEM and TF2AGW.INI under C:\WINDOWS;
In TF2AGW.INI ther must be the TCP IP address of your PC (if you are using only 1 PC and
no network, just try using the loopback address 127.0.0.1, otherwise you alredy know what
to do!; my TF2AGW.INI have the following lines:
[AGWPE]
IP_ADDRESS=127.0.0.1
TCP_PORT=8000
DEBUG=NOT
TRACE=5
MESSAGES=ON;
- Now configure TSTHWIN, putting the line" 4
0 1 " at the end of TSTHWIN.PRT;
- Load TSTHWIN (after AGWPE.EXE) and give the
comand AX MON IUSC to see packet traffic on the monitor window. Of course, if you want to
transmit, set you CALL (AX MY....) and others in TSTHWIN.CFG. It's possible to run other
packet software that use AGWPE at the same time.
- You can run also other packet software (such as
WINPACK, RXCLUSTER ecc.) at the same time.
FOR
ANY PROBLEM SEE TROUBLES PAGE
73 de iz7ath, Talino