Table 21/Q.763
Table 22/Q.763
Table 23/Q.763
Table 24/Q.763
Message Type: Circuit group query response (national use) | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Range and status (Note) | 3.43 | V |
2 |
Circuit state indicator | 3.14 | V |
2-33 |
NOTE - The status subfield is not present. |
Table 25/Q.763
Message Type: Circuit group reset acknowledgement | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Range and status | 3.43 | V |
3-34 |
Table 26/Q.763
Message Type: Confusion | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Cause indicators | 3.12 | V |
3-? |
End of optional parameters | 3.20 | O |
1 |
Table 27/Q.763
Table 28/Q.763
Message Type: Continuity | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Continuity indicators | 3.18 | F |
1 |
Table 29/Q.763
Message Type: Facility reject | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Facility indicator | 3.22 | F |
1 |
Cause indicators | 3.12 | V |
3-? |
User-to-user indicators | 3.60 | O |
3 |
End of optional parameters | 3.20 | O |
1 |
Table 30/Q.763
Message Type: Information (national use) | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Information indicators | 3.28 | F |
2 |
Calling party's category | 3.11 | O |
3 |
Calling party number (Note) | 3.10 | O |
4-? |
Call reference | 3.8 | O |
7 |
Connection request | 3.17 | O |
7-9 |
Parameter compatibility information | 3.41 | O |
4-? |
Network specific facility | 3.36 | O |
4-? |
End of optional parameters | 3.20 | O |
1 |
NOTE Peer-to-peer interworking with a pre-1997 version of ISUP may result in format errors and lead to the release of the call. |
Table 31/Q.763
Message Type: Information request (national use) | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Information request indicators | 3.29 | F |
2 |
Call reference | 3.8 | O |
7 |
Network specific facility | 3.36 | O |
4-? |
Parameter compatibility information | 3.41 | O |
4-? |
End of optional parameters | 3.20 | O |
1 |
Table 33/Q.763
Message Type: Release | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Cause indicators | 3.12 | V |
3-? |
Redirection information (national use) | 3.45 | O |
3-4 |
Redirection number (national use) (Note) | 3.46 | O |
5-? |
Access transport | 3.3 | O |
3-? |
Signalling point code (national use) | 3.50 | O |
4 |
User-to-user information | 3.61 | O |
3-131 |
Automatic congestion level | 3.4 | O |
3 |
Network specific facility (national use) | 3.36 | O |
4-? |
Access delivery information | 3.2 | O |
3 |
Parameter compatibility information | 3.41 | O |
4-? |
User-to-user indicators | 3.60 | O |
3 |
Display information | 3.77 | O |
3-? |
Remote operations (national use) | 3.48 | O |
8-? |
HTR information | 3.89 | O |
4-? |
Redirect counter (national use) | 3.97 | O |
3 |
Redirect backward information (national use) | 3.100 | O |
3-? |
End of optional parameters | 3.20 | O |
1 |
NOTE Peer-to-peer interworking with a pre-1997 version of ISUP may result in format errors and lead to the release of the call. |
Table 34/Q.763
Message Type: Release complete | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Cause indicators | 3.12 | O |
5-6 |
End of optional parameters | 3.20 | O |
1 |
Table 35/Q.763
Message Type: Subsequent address (Note 1) | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Subsequent number (Note 2) | 3.51 | V |
3-? |
End of optional parameters | 3.20 | O |
1 |
NOTE 1 No new optional parameters are
allowed in the subsequent address message. NOTE 2 Peer-to-peer interworking with a pre-1997 version of ISUP may result in format errors and lead to the release of the call. |
Table 36/Q.763
Message Type: User-to-user information | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
User-to-user information | 3.61 | V |
2-130 |
Access transport | 3.3 | O |
3-? |
End of optional parameters | 3.20 | O |
1 |
NOTE Parameter compatibility information parameter may be received in the future version. |
Table 37/Q.763
Message Type: Forward transfer | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Call reference (national use) | 3.8 | O |
7 |
End of optional parameters | 3.20 | O |
1 |
NOTE Parameter compatibility information parameter may be received in the future version. |
Table 38/Q.763
Message Type: Resume, Suspend | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Suspend/resume indicators | 3.52 | F |
1 |
Call reference (national use) | 3.8 | O |
7 |
End of optional parameters | 3.20 | O |
1 |
NOTE Parameter compatibility information parameter may be received in the future version. |
Table 39/Q.763
Message Type: Blocking Blocking acknowledgement Continuity check request Loop back acknowledgement, (national use) Overload, (national use) Reset circuit Unblocking Unblocking acknowledgement Unequipped circuit identification code, (national use) |
|||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Table 40/Q.763
Message Type: Circuit group blocking Circuit group blocking acknowledgement Circuit group unblocking Circuit group unblocking acknowledgement |
|||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Circuit group supervision message type | 3.13 | F |
1 |
Range and status | 3.43 | V |
3-34 |
Table 41/Q.763
Message Type: Circuit
group reset Circuit group query (national use) |
|||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Range and status (Note) | 3.43 | V |
2 |
NOTE -The status subfield is not present. |
Table 42/Q.763
Message Type: Facility
accepted Facility request |
|||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Facility indicator | 3.22 | F |
1 |
User-to-user indicators | 3.60 | O |
3 |
Call reference (national use) | 3.8 | O |
7 |
Connection request | 3.17 | O |
7-9 |
Parameter compatibility information | 3.41 | O |
4-? |
End of optional parameters | 3.20 | O |
1 |
Table 43/Q.763
Message Type: Pass-along (national use) | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | F |
1 |
|
Message type Mandatory fixed part Mandatory variable part Optional part |
Any message in Tables 21 to 50 which is relevant only at the "endpoint" of a connection as defined in clause 3/Q.764. |
Table 44/Q.763
Message Type: User
part test User part available |
|||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Parameter compatibility information | 3.41 | O |
4-? |
End of optional parameters | 3.20 | O |
1 |
Table 45/Q.763
Message Type: Facility | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Message compatibility information | 3.33 | O |
3-? |
Parameter compatibility information | 3.41 | O |
4-? |
Remote operations (national use) | 3.48 | O |
8-? |
Service activation | 3.49 | O |
3-? |
Call transfer number (Note) | 3.64 | O |
4-? |
Access transport | 3.3 | O |
3-? |
Generic notification indicator | 3.25 | O |
3 |
Redirection number | 3.46 | O |
4-? |
Pivot routeing indicators | 3.85 | O |
3 |
Pivot status (national use) | 3.92 | O |
3 |
Pivot counter | 3.93 | O |
3 |
Pivot routeing backward information | 3.95 | O |
3-? |
Redirect status (national use) | 3.98 | O |
3-? |
End of optional parameters | 3.20 | O |
1 |
NOTE Peer-to-peer interworking with a pre-1997 version of ISUP may result in format errors and lead to the release of the call. |
Table 46/Q.763
Message Type: Network resource management | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Message compatibility information | 3.33 | O |
3-? |
Parameter compatibility information | 3.41 | O |
4-? |
Echo control information | 3.19 | O |
3 |
End of optional parameters | 3.20 | O |
1 |
Table 47/Q.763
Message Type: Identification request | |||
Parameter name |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
MCID request indicators | 3.31 | O |
3 |
Message compatibility information | 3.33 | O |
3-? |
Parameter compatibility information | 3.41 | O |
4-? |
End of optional parameters | 3.20 | O |
1 |
Table 48/Q.763
Message Type: Identification response | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
MCID response indicators | 3.32 | O |
3 |
Message compatibility information | 3.33 | O |
3-? |
Parameter compatibility information | 3.41 | O |
4-? |
Calling party number (Note 2) | 3.10 | O |
4-? |
Access transport | 3.3 | O |
3-? |
Generic number (Notes 1 and 2) | 3.26 | O |
5-? |
Charged party identification (national use) | 3.75 | O |
3-? |
End of optional parameters | 3.20 | O |
1 |
NOTE 1 This parameter may be repeated. NOTE 2 Peer-to-peer interworking with a pre-1997 version of ISUP may result in format errors and lead to the release of the call. |
Table 49/Q.763
Message Type: Segmentation | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Access transport | 3.3 | O |
3-? |
User-to-user information | 3.61 | O |
3-131 |
Message compatibility information | 3.33 | O |
3-? |
Generic digits (national use) (Note 1) | 3.24 | O |
4-? |
Generic notification indicator (Note 1) | 3.25 | O |
3 |
Generic number (Notes 1 and 2) | 3.26 | O |
5-? |
End of optional parameters | 3.20 | O |
1 |
NOTE 1 This parameter may be repeated. NOTE 2 Peer-to-peer interworking with a pre-1997 version of ISUP may result in format errors and lead to the release of the call. |
Table 50/Q.763
Message Type: Loop prevention | |||
Parameter |
Reference (subclause) |
Type |
Length (octets) |
Message type | 2.1 | F |
1 |
Message compatibility information | 3.33 | O |
3-? |
Parameter compatibility information | 3.41 | O |
4-? |
Call transfer reference | 3.65 | O |
3 |
Loop prevention indicators | 3.67 | O |
3 |
End of optional parameters | 3.20 | O |
1 |
Table 51/Q.763
Message Type: Application transport | |||
Parameter |
Reference |
Type |
Length |
Message type | 2.1 | F |
1 |
Message compatibility information | 3.33 | O |
3-? |
Parameter compatibility information | 3.41 | O |
4-? |
Application transport (Note 1) | 3.82 | O |
5-? |
End of optional parameters | 3.20 | O |
1 |
NOTE 1 - The message may contain one or more Application transport parameters (APP) referring to different Application Context Identifiers. |
Table 52/Q.763
Message Type: Pre-Release information | |||
Parameter |
Reference |
Type |
Length |
Message type | F |
1 |
|
Message compatibility information | O |
3-? |
|
Parameter compatibility information | O |
4-? |
|
Optional forward call indicators (Note 1) | O |
3 |
|
Optional backward call indicators (Note 1) | O |
3 |
|
Application transport (Note 2) | O |
5-? |
|
End of optional parameters | O |
1 |
|
NOTE 1 - These parameters are required to
allow the message to be segmented using the ISUP simple segmentation procedure. They
should be mutually exclusive. NOTE 2 - The message may contain one or more Application transport parameters (APP) referring to different Application Context Identifiers. |
Table 53/Q.763
Message Type: Subsequent directory number (national use) (Note 1) | |||
Parameter |
Reference |
Type |
Length |
Message type | F |
1 |
|
Subsequent number | O |
4-? |
|
Message compatibility information | O |
4-? |
|
End of optional parameters | O |
1 |
|
NOTE 1 - No new optional parameters are allowed in the Subsequent Directory Number message. |