|
|
MODULE I - INTRODUCTION TO HAM RADIO
Why a license? Because "No Radio station in the Philippine Amateur Radio Service shall be operated, except and in accordance with a valid permit or license issued by the National Telecommunications Commission." (Section II-1, Revised Amateur Radio Service Regulations) Although the main purpose of Amateur Radio is fun, it is called the "Amateur Radio Service" because it also has a serious face. Like any other similar agency in other countries, the National Telecommunications Commission (NTC) regulates the use or operation of amateur radio in order to maintain high standard of service, technique, and procedures in the Amateur Radio Service. |   |
![]()
|
The following are the conditions for the grant of Amateur License by the NTC: 1. An applicant for an amateur radio license must possess the following general qualifications:
|
2. An amateur radio license shall be issued to a person who has passed the appropriate NTC examination. 3. A complete set of applications for an amateur license shall have been filed with the NTC. What's the right license for me? There are four classes of amateur radio license. The higher the class license you have, the more privileges and modes of operation you get. But each higher class license requires progressively more knowledge of technology, rules and regulations, as well as higher Morse code proficiency. So, you can learn the basics or you can become an expert and still enjoy the hobby. The "entry level" license for radio amateurs is the easy-to-learn easy-to-earn "code free" or Novice class license (Class D), which requires passing examinations on Element II - Rules and Regulations; Element III - Fundamentals of Electroncis and Electricity; and Element IV - Amateur Radio Practice. An applicant may also take the Morse Code (Element I) to qualify for the Technician class (Class C) license. The code test for this class of amateur is to receive/copy at the speed of 7 words per minute for 5 minutes. The General class (Class B) requires the applicant to pass Element I - Morse Code (10 wpm); Element V - Signals, Frequencies and Emission; Element VI - Circuit Components; and Element VII - Operating Procedures. The Advanced class (Class A) which is the highest class requires the applicant to pass Element I - Morse Code (13 wpm); Element VIII - Practical Circuits; Element IX - Antenna and Transmission Lines; and Element X - Radio Wave Propagation.
|   |
|