TubePad 6.0 Tube Chart

Quick Reference Data

Name: 6L6GC
Use:
Glass octal tube type used in the output stage of audio amplifying equipment, especially units designed to have ample reserve of power-delivering ability. This tube, like other power-handling tubes, should be adequately ventilated. 6L6GC can be used in place of type 6L6 and may be supplied with pin 1 omitted. In some applications, this tube might be replaced on lower power applications by the 6V6, such as QRP class C finals or power oscillators.
Notes: Requires an octal socket.


6L6GC
Beam Power Pentode

Characteristics
Data Source. . . . . . . . . Syl-59
Heater or Filament Voltage . 6.3 volts
Heater or Filament Current . 0.9 amperes
EIA Base . . . . . . . . . . 7AC
Substitutes. . . . . . . . . 6L6, 6L6G, 5881


Capacitances and Design Maximum Values:

C/in. . . . . . . . . . . .       10 pf
C/out . . . . . . . . . . .      6.5 pf
C/gp. . . . . . . . . . . .      0.6 pf
Plate Dissipation . . . . .       30 watts
Screen Dissipation. . . . .        5 watts
Maximum Plate Voltage . . .      500 volts
Maximum Screen Voltage. . .      450 volts



Typical Operation as a Receiving Tube                   

Description   Ep    Eg EgMax Es  Is IsMax Ip IpMax   Rp   TC AF  Zl   PO
------------------------------------------------------------------------
Class A (Tri)250   -20    8   -   -    -  40   44  1.7K 4700 -   5K  1.4
Class A Amp  250   -14   14 250   5  7.3  72   79 22.5K 6000 - 2.5K  6.5
Class A Amp  300 -12.5 12.5 200 2.5  4.7  48   55   35K 5300 - 4.5K  6.5
Class A Amp  400  200*   28 300   7   16 112  128     -    - - 6.6K   32
Class A Amp  350   -18   18 250 2.5    7  54   66   33K 5200 - 4.2K 10.8
PP Class A   250   -16   32 250  10   16 120  140  24.5 5500 -   5K 14.5
PP Class A   270 -17.5   35 270  11   17 134  155  23.5 5700 -   5K 17.5
PP Class AB1 330   -24   48 330   5   11 122  184     -    - - 3.8K 31.5
PP Class AB1 400   -25   50 300   6   17 102  152     -    - - 6.6K   34
PP Class AB1 450   -30   60 350 3.4 19.2  95  194     -    - - 6.0K   50
PP Class AB1                                                             
   (Ult lin) 410  220*   68 410   -    - 134  155     -    - - 8.0K   24
PP Class AB1 360 -22.5   45 270   5   11  88  140     -    - - 3.8K   18
PP Class AB1 360 -22.5   45 270   5   15  88  132     -    - - 6.6K 26.5
PP Class AB1 450   -37   70 400 5.6   22 116  210     -    - - 5.6k   55
PP Class AB2 360   -18   52 225 3.5   11  78  142     -    - -   6K   31
PP Class AB2 360 -22.5   72 270   5   16  88  205     -    - - 3.8K   47
* = Value of cathode bias resistor