RE: [SI-LIST] : Capacitor dielectric type

About this list Date view Thread view Subject view Author view

From: Larry Miller ([email protected])
Date: Fri Nov 17 2000 - 08:11:19 PST


I never heard of any problems mixing. They are just different temperature
specs and tolerances. However, are you using through-hole disc caps? Your
choice of values sounds like you need surface-mount units.

Larry Miller

> -----Original Message-----
> From: Tae-Kwang Jeon [SMTP:[email protected]]
> Sent: Thursday, November 16, 2000 3:47 PM
> To: [email protected]
> Subject: [SI-LIST] : Capacitor dielectric type
>
> Hello,
>
> I'm trying to put multiple decoupling capacitos on my board mixing small
> and
> large values in order to minimize the ESL and ESR.
> What I'm wondering is when I use different types of dielectic for the
> capacitors. For instance, I'm going to use 0.022uF X7R type and 470pF of
> NPO type because NPO has the lowest ESR.
>
> Does anybody know whether or not it's not a big deal in terms of mixed
> dielectric material for high frequency decoupling?
>
> Thanks,
> TK
>
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:10 PDT