Re: [SI-LIST] : Mentor Graphics ICX

About this list Date view Thread view Subject view Author view

From: Brad Underwood (Brad.Underwood@metera.com)
Date: Wed Oct 18 2000 - 07:08:48 PDT


I've used ICX and compared results (lab based measurements) with
simulations. The tools simulations compared very accurately to
measurements like pulse response (amplitude, offset, waveform,
duty-cycle, etc.) and timing on a 622 Mb/s datapath.

It's a very power and useful tool when used properly. Ain't that right
Tony! (I know you're watching...)

Regards,
Brad

....................................................
Brad Underwood
Hardware Engineer phone: (469) 330-1765
Metera Networks, Inc. cell: (214) 642-0769
1202 Richardson Dr, Suit 100 fax: (469) 330-1762
Richardson, Tx 75080

Gerald Aska wrote:
>
> I would like some feedback on using Mentor Graphics ICX tool for signal
> integrity simulations. How does it compare to Hyperlinx and
> SpectraQuest. It seems to me that ICX is not use that much in the
> industry. I am just curious to know why.
>
> Gerald
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:47 PDT