Re: [SI-LIST] : PCI model

About this list Date view Thread view Subject view Author view

From: Michael Nudelman (mnudelman@tellium.com)
Date: Fri Sep 29 2000 - 11:42:09 PDT


I used HyperLynx, rather successfully. The only problem is my PCI
bridges' vendor (V3) as well as other chips' vendors (QLogic) did not
supply any IBISes and I had to improvise. But, UI diagramms for PCI bus
drivers are known from PCI specs and vendors try to adhere to them.

George Borkowicz wrote:

>
>
> I guess many people here have modeled PCI at one time or another.
> What environment are you interested in?
>
> gjb
>
> -----Original Message-----
> From: Johnny Pietraroia [SMTP:jpietrar@matrox.com]
> Sent: Friday, September 29, 2000 12:52 PM
> To: si-list@silab.eng.sun.com
> Subject: [SI-LIST] : PCI model
>
>
> Hi everyone!
>
> i was wondering if anyone has a model for the PCI bus ?
>
> thanks
> --
> *************************************
> *Johnny Pietraroia *
> *MGI CAD PCB VIDEOENG g2dhard image *
> *Signal Integrity des. sim. Tec. *
> *514-822-6000 ext 7198 *
> *Matrox Electronic Systems *
> *************************************
>
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:37 PDT