From: Stuart Adams (firstname.lastname@example.org)
Date: Fri Aug 25 2000 - 12:32:26 PDT
Is there a rule of thumb for how many stitching
via's one should use to tie multiple GND
planes together ??
In my case my board is 1.4" x 2.4" with blind vias
and the thru-hole stitching via's will be the only
connection between the planes in the top half
and bottom half of the board.
**** To unsubscribe from si-list or si-list-digest: send e-mail to
email@example.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:29:21 PDT