[SI-LIST] : High Speed Card Edge Connector

About this list Date view Thread view Subject view Author view

From: John Fisher (jmfisher@cisco.com)
Date: Fri Jul 28 2000 - 09:39:16 PDT


SI listers,

The Intel Xeon Processor module uses a High Speed Card Edge Connector which
looks similar to an AMP part but appears to have greater density. Anyone
here have any experience with this? Who makes it? I can't tell by looking
at the processor side as all you see is a PCB w/ fingers/pads. I tried my
AMP Tyco Field Eng. but they haven't got back to me with anything
substantial yet.

Regards,

John Fisher

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:53 PST