From: Chris Heard ([email protected])
Date: Tue Jun 20 2000 - 09:46:05 PDT
RLGC can do the trick, just prepare yourself for the most difficult
installation of software you've ever seen. Allow 2 weeks and 8 hours of
time on the phone with tech support.
Chris
-----Original Message-----
From: Scott McMorrow [mailto:[email protected]]
Sent: Monday, June 19, 2000 6:34 PM
To: Ming Yin
Cc: [email protected]
Subject: Re: [SI-LIST] : extraction tools
Ming,
You might try ApsimRLGC from Applied Simulation Technology.
http://www.apsimtech.com/products/ApsimRLGC/RLGCdata.htm
regards,
scott
Ming Yin wrote:
> Hi all,
>
> I'm looking for the tools which can extract the RLC parameters for
> package, such as vias, leads and wirebond. I knew that Ansoft has some
> tools for extraction. But is there any other tools existing? Any
> suggestion?
>
> Ming
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
-- Scott McMorrow Principal Engineer SiQual, Signal Quality Engineering 18735 SW Boones Ferry Road Tualatin, OR 97062-3090 (503) 885-1231 http://www.siqual.com**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****
This archive was generated by hypermail 2b29 : Wed Nov 22 2000 - 10:50:40 PST