From: Jason Zheng ([email protected])
Date: Thu Nov 04 1999 - 21:47:17 PST
> Steve is right that the part is not fast enough for you. Besides, you may not
> be happy with 500ps skew among the outputs
Thank you for your reply!
Our ASIC is done already that needs 240 Mhz clock input.
We are designing the prototype board for them. We plan to
have adjustable delay lines to manage the skew. The key
is to find a part that is fast enough to drive 100 or 50 ohm
transmission line at TTL/CMOS levels. If you know of any part
that may do it in normal temperature condition, please let me
know. This prototype board does not need to work at worst temperature
conditions; will be just the room temperature.
thanks in advance!
**** To unsubscribe from si-list: send e-mail to [email protected] In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****
This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:37 PST