RE: [SI-LIST] : Internal termiantion (IBIS)

About this list Date view Thread view Subject view Author view

From: Ingraham, Andrew (Andrew.Ingraham@compaq.com)
Date: Sat Nov 27 1999 - 09:31:11 PST


>Suppose if there are any termination inside an IC, is it possible to get
this information from the ibis file?

Indirectly, yes. The clamp I-V curves will include termination (unless it
is somehow capacitively coupled). You can use the curves (between power and
ground rails) to judge the impedance seen from the outside.

Regards,
Andy

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:39:03 PST