From: Tom gandy ([email protected])
Date: Tue Nov 16 1999 - 15:21:22 PST
>Fibre Channel DB9 Cables from Amphenol and W.L. Gore (with and without
>built-in equalizer) short the shield to the plug housing on both ends.
>500 McCarthy Blvd.
>Milpitas, CA 95035
Wouldn't this cause nasty galvanic currents through the shield if the two
pieces of equipment, attached by the cable with the DB9s, were, say, on two
different phases of a three phase power feed to a building.
Am I missing something?
**** To unsubscribe from si-list: send e-mail to [email protected] In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****
This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 11:38:56 PST