[SI-LIST] : BTE models

Dan Bostan (dan@uniant.com)
Wed, 25 Aug 1999 16:22:47 -0500

Does anybody have IBIS/Viewlogic/HSpice models for SN74ABTE16245 and
SN74ABTE16246 (TI)?
If yes, may I get them?
Thank you.

Dan Bostan
Engineer
Corvia Networks e-mail: dan@corvia.com
212 Gibraltar Dr. ph: 408.752.0550/x111
Sunnyvale, CA 94089 fax: 408.752.0551

----- Original Message -----
From: C. Kumar <kumarchi@yahoo.com>
To: <si-list@silab.eng.sun.com>
Sent: Tuesday, August 24, 1999 11:47 AM
Subject: RE: [SI-LIST] : Search ? IBIS to HSPICE Tool...

> The original context was probably not hspice but whether you can
> recreate transistor level model from ibis. In that sense the answer
> will be no.
>
> --- "Muranyi, Arpad" <arpad.muranyi@intel.com> wrote:
> > HSPICE now has a new element, the B-element which
> > does directly read
> > IBIS files and supports the all buffer types in IBIS
> > version 2.1 so
> > there is no need for conversion tools. Even though
> > this B-element
> > first came out in H98.4, you should use H99.2 or
> > higher because of
> > some initial problems.
> >
> > Arpad Muranyi
> > Intel Corporation
> >
> ======================================================================
> >
> > -----Original Message-----
> > From: Shah, Nilesh N
> > [mailto:nilesh.n.shah@intel.com]
> > Sent: Monday, August 23, 1999 7:15 PM
> > To: 'si-list@silab.eng.sun.com'
> > Subject: RE: [SI-LIST] : Search ? IBIS to HSPICE
> > Tool...
> >
> >
> > I don't think such a tool exists.
> > IBIS models could have been output from any 1 of
> > millions of buffer
> > configurations, package
> > models, pin parasitics etc.
> > From what I understand about IBIS, There's no way to
> > recreate the Hspice
> > model.
> > That was the original intent of IBIS, to restrict
> > proprietary information.
> > If you find such a tool, please let me know.
> > Nilesh
> >
> > Nilesh N Shah,
> > Package Electrical Design Engineer,
> > PCG, Folsom, CA.
> > Intel Corporation.
> > tel:916-356 1129.
> >
> >
> > -----Original Message-----
> > From: Ku Ja Yong [mailto:joy@lgsemicon.co.kr]
> > Sent: Tuesday, August 24, 1999 2:45 AM
> > To: si-list@silab.eng.sun.com
> > Subject: [SI-LIST] : Search ? IBIS to HSPICE Tool...
> >
> >
> > Hi, all
> >
> > I am looking for the conversion tool of IBIS to
> > HSPICE.
> >
> > Thank in advance.
> >
> >
> > **** To unsubscribe from si-list: send e-mail to
> > majordomo@silab.eng.sun.com. In the BODY of message
> > put: UNSUBSCRIBE si-
> > list, for more help, put HELP. si-list archives are
> > accessible at
> > http://www.qsl.net/wb6tpu/si-list ****
> >
> > **** To unsubscribe from si-list: send e-mail to
> > majordomo@silab.eng.sun.com. In the BODY of message
> > put: UNSUBSCRIBE si-
> > list, for more help, put HELP. si-list archives are
> > accessible at
> > http://www.qsl.net/wb6tpu/si-list ****
> >
> > **** To unsubscribe from si-list: send e-mail to
> > majordomo@silab.eng.sun.com. In the BODY of message
> > put: UNSUBSCRIBE si-list, for more help, put HELP.
> > si-list archives are accessible at
> > http://www.qsl.net/wb6tpu/si-list ****
> >
> >
>
> __________________________________________________
> Do You Yahoo!?
> Bid and sell for free at http://auctions.yahoo.com
>
>
> **** To unsubscribe from si-list: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list, for more help, put HELP. si-list archives are accessible at
http://www.qsl.net/wb6tpu/si-list ****
>
>

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****