Re: [SI-LIST] : Flat Ribbon Cable substitutes

John Fisher (jmfisher@cisco.com)
Tue, 25 May 1999 17:01:38 -0700

Peter,

Take a look at the offerings at www.joysignal.com or www.wovenelectronics.com

regards,

John

At 08:06 AM 5/26/99 +1000, you wrote:
>Hi,
>
>I've been looking at some of Parlex Corps laminated, shielded flat cable
>as a substitute for 40-way flat ribbon cable. Unshielded, the cable has
>a characteristic impedance of around 100 ohms but with the silver
>conductive ink "shield" applied, it drops to 33 ohms. This is a bit too
>tough for me to drive. Otherwise the cable would be ideal.
>
>I was wondering whether anyone knows of other companies that make
>"interesting" cables that I should know about. I know of Gore and
>Precision Interconnect.
>
>Thanks
>
>Peter Baxter
>
>**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****
>

**** To unsubscribe from si-list: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****