[SI-LIST] : Boston area IPC/DC mtg, 24-Apr 6pm

About this list Date view Thread view Subject view Author view

From: Jeff Seeger (jseeger@appliedcad.com)
Date: Wed Apr 18 2001 - 11:58:51 PDT


,
        Hello, all -

        I wasn't going to post this here, but someone suggested that
        with the profile of the speaker and the content, it would be
        of interest to folks in the area. So I hope no-one considers
        this as spam!

                  Ohmega Planar Resistor Technology
 
        The Greater Boston Chapter of the IPC Designer's Council will
        hold its next meeting on Tuesday, April 24th at the Best
        Western TLC Hotel in Waltham at 6pm.
 
        Topic and Speaker:
 
        Bruce Mahler, Vice President of Ohmega Technologies Inc, will
        present a talk on planar (buried) resistors and their benefits
        in today's space and performance constrained world. While BC
        capacitance has been well discussed in our group, this mature
        technology represents the next step for reducing attached part
        count and complexity. In use for over 20 years, Ohmega resis-
        tor technology claims cost benefits when replacing soldered
        components at as few as 3 or 4 resistors per board square inch.
 
        Agenda:
 
        Please note there is a $15 meeting fee for members, $20 for
        non-members. Pizza/soft drinks will be served.
 
        6:00 Arrivals and Pizza
        6:45 Chapter Business
        7:00 Bruce Mahler/Ohmega Technologies: Planar Resistors
 
        Location/Directions:
 
        The Best Western TLC Hotel in Waltham is located at exit 27A
        off route 95/128, proceed east on Totten Pond Rd and the hotel
        is on the left.
 
        RSVP's requested:
 
        Please RSVP by sending an email to jseeger@appliedcad.com with
        the subject "RSVP IPC/DC" or phone Judy Horn at 781 942 7471
        by Monday 12pm, April 23rd. Please treat an RSVP as a commit-
        ment to attend as the food order is based on this.

        Thanks and regards,

-- 
 
      Jeff Seeger                         Applied CAD Knowledge Inc
      Chief Technical Officer                  Tyngsboro, MA  01879
      jseeger "at" appliedcad "dot" com                978 649 9800
        President, IPC Designer's Council, Greater Boston Chapter

**** To unsubscribe from si-list or si-list-digest: send e-mail to majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:38 PDT