[SI-LIST] : How to redirect a 2.5Gb/s from one source to one of two targets?

About this list Date view Thread view Subject view Author view

From: Shahar Eytan (shahar@mellanox.co.il)
Date: Mon Apr 16 2001 - 02:00:04 PDT


Hi,

In my design I have a differential 2.5Gb/s lines going in and out of a
Serdes. I would like them to go to either High Speed connector or to two SMA
connectors (for the differential pair) for debug and characterization
reasons. The length of the high speed lines is going to be ~4" and I'm using
FR4.
I was thinking of different placements of the series capacitors on the link.
Do you have any other suggestions on how to do that without totally killing
my signals? and if this is the only methode, do you have any tips for me?

Thanks,

Shahar Eytan
Mellanox Technologies Ltd.
mailto: <shahar@mellanox.co.il>
Tel: 972-4-9593244 ext 264
Fax: 972-4-9593245

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:35 PDT