[SI-LIST] : 1/2 oz copper on high speed boards

About this list Date view Thread view Subject view Author view

From: Javin Olson (Javin.Olson@plexus.com)
Date: Mon Apr 16 2001 - 06:48:21 PDT


I am working with a customer that is pushing for 1/2 oz copper for a
high speed board consisting of 2.5Gbps CML, 622Mhz LVDS, on down to
33Mhz processor speeds. I can see where moving to 1/2 oz copper will
not affect the high speed signals that much since most of the signal
will be on the surface of the high speed signal traces.

I am wondering though, how much, and what effect will the 1/2 oz copper
have on the normal TTL and CMOS signals running at 33-100Mhz?

--------------------------------------------
Javin Olson
Plexus Technology Group
Design Engineer
920-969-6171

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:35 PDT