Re: [SI-LIST] : How to corelate max. overshoot and undershoot values?

About this list Date view Thread view Subject view Author view

From: Tadashi ARAI (arap@pc.fujitsu.com)
Date: Thu Mar 08 2001 - 16:30:36 PST


Howdy,

I used to refer to Vih_max / Vil_min at first, then see the "Absolute
maximum ratings".

Oh! first of all, I should read the application notes on overshoot, if
available :)

//// /// // / / / / / / / / / /
Tadashi Arai//Platform Developing Dept.,Desktop Prd Div. Fujitsu Limited
arap@pc.fujitsu.com TEL:+81-42-370-7624 Inagi-shi, Tokyo, Japan
/ / / / / / / / / / / // ///
On Thu, 8 Mar 2001 11:04:46 -0800
Mail from bpatel@cyras.com described as below:

> Hi! The simulation results give us the maximum overshoot and undershoot the
> signal has at the receiver and these values will tell us whether the chip
> can tolerate such levels. Now, in some datasheets they do mention the max.
> overshoot and undershoot values but some don't, so in these cases how do you
> proceed?
> One call up the vendor(....too long, is there a second way to decipher form
> the datasheet?
> Thanks
> Bhavesh
>
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
>

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:09 PDT