[SI-LIST] : How to corelate max. overshoot and undershoot values?

From: Patel, Bhavesh ([email protected])
Date: Thu Mar 08 2001 - 11:04:46 PST

• Next message: Thomas Jackson: "RE: [SI-LIST] : How to correlate max. overshoot and undershoot va lues?"
• Previous message: Greim, Michael: "RE: [SI-LIST] : Simulation of address and data bus"
• Next in thread: Tadashi ARAI: "Re: [SI-LIST] : How to corelate max. overshoot and undershoot values?"
• Reply: Tadashi ARAI: "Re: [SI-LIST] : How to corelate max. overshoot and undershoot values?"

Hi! The simulation results give us the maximum overshoot and undershoot the
signal has at the receiver and these values will tell us whether the chip
can tolerate such levels. Now, in some datasheets they do mention the max.
overshoot and undershoot values but some don't, so in these cases how do you
proceed?
One call up the vendor(....too long, is there a second way to decipher form
the datasheet?
Thanks
Bhavesh

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Thomas Jackson: "RE: [SI-LIST] : How to correlate max. overshoot and undershoot va lues?"
• Previous message: Greim, Michael: "RE: [SI-LIST] : Simulation of address and data bus"
• Next in thread: Tadashi ARAI: "Re: [SI-LIST] : How to corelate max. overshoot and undershoot values?"
• Reply: Tadashi ARAI: "Re: [SI-LIST] : How to corelate max. overshoot and undershoot values?"

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:09 PDT