[Home] [Step 1] [Step 2] [Step 3] [Quick Start]

[Questions & Answers]
[FTP 101: A QSL.NET FTP tutorial for QSL.NET users]

Download and Install


    1. The first step is to download WS_FTP*. Click here to download Ws_ftp32.exe now!

    2. Save the file to your hard drive as "Ws_ftp32.exe"

    3. Once the download is complete, it should take about 7-17 minutes depending on your modem's speed, locate the file "Ws_ftp32.exe". When you find it, open it.

    4. After opening the file, you will see a window that looks like this:
      [screen shot]
      make sure that "Install WS_FTP LE" is selected, and then click "OK".

    5. Next, you must answer a few questions...
      [screen shot]
      Choose "Other" and click the "Next" button.

    6. Choose "At Home" and "For Personal Use"...
      [screen shot]
      Click the next button to contiune.

    7. Next, the WS_FTP setup program displays a license agreement. Read it! Choose Accept to continue
      [Screen shot]

    8. Setup now asks where it should install the WS_FTP program files...
      [screen shot]
      Choose "OK" to install in the default directory of "c:\program files\ws_ftp".

    9. Now Setup wants to know where the files are that you wish to upload...
      [screen shot]
      Enter the name of the directory where your webpages are located. Then, choose "OK"

    10. After the files are copied from the archive to the installation directory that you chose, Setup asks for your e-mail address.
      [screen shot]
      Enter your e-mail address, and choose "OK" to continue.

    11. That's it...
      [screen shot]
      All done! Choose "OK"
      Now you must configure WS_FTP to connect to QSL.NET.



    *The file's name is Ws_ftp32.exe, and the file size is 661,504 bytes.

    [ Home ] [ Quick Start ] [ Q&A ] [ Step 1 ] [ Step 2 ] [ Step 3 ]

     
    [email protected]