- Start WS_FTP. Once you start WS_FTP, you will see...
Click the "New" button near the top of the window.
- Now you see this...
- Fill in the fields as shown below...
Make sure the fill in the following fields correctly:
- Host: ftp.qsl.net or qsl.net
- User ID: Should be YOUR QSL.NET username
- Password: Should be YOUR QSL.NET password -- CaSe SeNsItIvE!!
- Remote Host: Should be "/home/httpd/html/YOUR_QSL.NET_USER_NAME"
- Local PC: Should be the directory on your computer that contains your webpages
Once you have everything filled out, make sure that the "Save Password"
checkbox is checked. Your screen should look something like the above picture.
Once you have verified that every is filled out properly, connect to the Internet
and then click "OK".
Now you should be connected to QSL.NET
|