If you are not performing a hard drive installation, please skip ahead to Section 4.8. Otherwise, read on.
At this point, a dialog box entitled ``Select Partition'' is displayed (see Figure 27). Enter the device name of the partition holding the RedHat directory tree. There is also a field labelled ``Directory''. If the RedHat directory is not in the root directory of that partition (for example, /test/new/RedHat), enter the path to the RedHat directory (in our example, /test/new.
If the installation program was unable to find the necessary files on the partition and directory you've specified, you'll be returned to the ``Select Partition'' dialog box to make the necessary corrections.
If everything has been specified properly, you should see a message box indicating that the packages are being scanned. Move on to the next section to continue installing Red Hat Linux.