LUXEMBOURG DIGITAL NETWORK

LUXEMBOURG AMATEUR RADIO SOCIETY (LINK)
LUXEMBOURG AMATEUR CALLBOOK*
PACKET MAP OF LUXEMBOURG FROM BBS'S
LUXEMBOURG BACKBONE*
STATION TABLE


STATION INFORMATION BBS COMMANDS NODE COMMANDS HEARD LIST
LX0HST LX0HST INFORMATION LX0HST BBS COMMANDS LX0HST NODE COMMANDS LX0HST HEARD LIST
LX0IST UNKNOWN UNKNOWN UNKNOWN LX0IST HEARD LIST
LX0PAC LX0PAC INFORMATION UNKNOWN LX0PAC NODE COMMANDS LX0PAC HEARD LIST
LX0PAR UNKNOWN UNKNOWN UNKNOWN LX0PAR HEARD LIST
LX0NET NONE NONE LX0NET NODE COMMANDS LX0NET HEARD LIST
DB0SAB DB0SAB INFORMATION NONE DB0SAB NODE COMMANDS DB0SAB HEARD LIST

OPERATING NOTES

Gateways on the internet to LUXNET: kb0tdf.ampr.org ve7tsi.ampr.org bbs.ve6kik.ampr.org

The gateway to the Luxembourg Digital Amateur Radio Network is in Findel, Luxembourg. The callsign is LX0IST/LUXNET. It is accessible from kb0tdf.ampr.org on the internet, or from kb0tdf's netrom node VIKING. Once connected to KB0TDF/VIKING, connect to LUXNET using the command 'c luxnet'.

The command 'PAC' on LX0IST will immediately connect you to LX0PAC. The command 'HST' will immediately connect you to LX0HST.

From LX0IST you can connect to LX0HST using the 'c' command. Use 'c uhf lx0hst'.

Connect to F6KWP: VIKING <> LUXNET <> LX0PAC <> LX0PAR <> F6KWP

LX0NET: System in Rodange: VIKING <> LUXNET <> LX0NET

LX0PRG-10 CLUSTER: VIKING <> LUXNET <> LX0PAC <> LX0PRG

There isn't much information about these systems:

LX0NET: System in Rodange: VIKING <> LUXNET <> LX0NET Seems to be similar to LX0HST
LX9LGL BBS: VIKING <> LUXNET <> LX0PAC <> LX0PLU <> LX9LGL

Drill into Germany: VIKING <> LUXNET <> LX0HST <> DB0MON <> DB0NEI <> DB0BM <> DB0II


LINKS/MISC

Map of Luxembourg
Grand Duchy of Luxembourg
Differdange Home Page
Map of Differdange
Panoramic view of Differdange
PEOPLE


CONTACT ME VIA AMATEUR RADIO: You can leave me mail on my packet radio mailbox NR0D-1. It is a Kantronics KAM Plus BBS on 145.03 MHz in Minneapolis, Minnesota, USA (EN34iv). To reach it, either telnet to kb0tdf.ampr.org, or connect to netrom node VIKING using 'c viking'. Once on VIKING/KB0TDF, issue the command 'c 03 nr0d-1'. That will connect you to my mailbox via his 145.03 port. Once connected to my mailbox, issue the command to send me personal mail, which is 'sp nr0d' and follow the instructions.
If you want to send me internet email, my address is [email protected]