Node Naming

We are encouraging users to use a common naming convention when naming devices on the local mesh network. This will help others identify your node and pass along some useful information about your installation.

Here is an example for my node at my residence in Gresham, OR:

N7DOD-QTH-M3-Rocket-Omni-Node01

This breaks down to:

N7DOD -> my callsign. Always comes first.
QTH -> something to ID this node. In this case QTH stands for my residence
M3-Rocket-Omni -> the type of equipment, a 3 GHz Rocket w/Omni antenna
Node01 -> the node number.

So my link will show up as http://N7DOD-QTH-M3-Rocket-Omni-Node01.local.mesh on the node status page.

PDX-AREDN-Project © 2017 Frontier Theme