Remote Station Operating Instructions
The software is under development and the audio via Skype is not operational. However, the rest of the station works and all function buttons on the display are active and the actual FT-1000MP-MkV is being controlled via your web browser.
All the functions can be tested, such as change of frequency, up tuning, down tuning, TX/RX, turning the rotator, switching in filters, etc.
The display at the bottom of the screen is the 50 latest DX spots from the DX cluster in Sweden. If you click on the SET button, then all the details of that DX station are transferred to the FT-1000MP-MkV, including the frequency, mode and the beam heading is plugged into the rotator. The operator only has to press the rotator button to complete the task.
Play with the controls and click on DISCONNECT to log off from the remote station.
The text below is the help file under construction and will show how to operate the station when completed. Meanwhile, it is not functional.
· Click on each control to learn its function and facilities.
· Press the [Backspace] key to return to the control function table after reading the description.
· Leave this screen open for easy reference while operating.
· The system will automatically disconnect from the station after 15 minutes of inactivity by the user.
AUTO USB 2.4
+10 +100 +500 +5K
-10 -100 -500 -5K
CW1 CW2 CW3
MAC1 MAC2 MAC3