HamDream TX



Start the TX with starttx.bat

Settings -> sound in : input device. the device you have connected the microphone.
Settings -> sound out : output device. the device sending the drm signal to the trx.
Settings -> tx port : the Com Port you use to set thr trx in transmit mode.

label : enter your callsign

if:
lower bandwidth edge in 2.1 and 2.3 khz modes (default 400 hz),
middle of bandwidth in 4.2 and 4.6 khz modes (default 2500/2700 hz).

input: microphone input level meter (slow, delay).

audio enable: you will transmit audio

data enable: you will transmit pictures. use the ADD button to insert picture files.