ZL2AFP WSQ
==========

Rev 1.0 23/12/2013

A weak signal QSO mode for LF/MF.

To install, unzip this archive into a suitable folder on your C: drive. Right-click on the executable WSQ.EXE, select 'Create Shortcut', then drag the shortcut to the desktop or your menu.

Then read the accompanying WSQhelp.htm file.

This archive contains:

WSQ.exe			The program executable
WSQ RX screen.PNG	A screen-shot of the program
FEI calculator.xls	A frequency calculator specifically for the FEI FE-56xx synthesizers and this program
WSQhelp.htm		The Help file for this program
Readme.txt		This file
setup.txt		The parameter setup file for the program. The user should edit this. It contains COM port info and a list of frequency commands.

This software and associated files as detailed above remain the property of Con Wassilieff and/or Murray Greenman and are Copyright (C) 2013.

You may use the software, pass it on to friends, etc, and freely edit the setup.txt file, but you may not change the documentation or program without express permission from the authors. Contact zl2afp "at" xtra.co.nz for more information.

Remember - this mode WON'T WORK on HF, so don't bother trying! It is an LF/MF mode ONLY.

Recommended calling/operating frequency - 500Hz below the WSPR slot on LF and MF bands. For example, that's 475.2kHz (dial frequency 474.2kHz) on 630m.
Look for changes and updates to these recommendations on the various LF/MF reflectors.

73,
Murray ZL1BPU
