:click on the pictures for a better view

The base station is a Yaesu FT 990DC full option installed and you can see it here. I will let you guess that the other one is a 706mkII full option on the top of the pile at the right of the picture, this one is for the mobile operation and is accompanied by an AT180 tuner and a solid state HF amplifier with a 400W P.E.P  capability (HF and VHF).The other Linear Amp is a twin 4-400, the antenna tuner is a TenTec model 229/2kW and the meter is a  Daiwa CN-101L.

As you can see, there is a desk microphone which is a Heil HC-5 and the CW key is a Bencher. There is a TNC/modem for the digital modes as well - an AEA Pakratt make model 232MBX

You can have a better view below, the amplifier, the tuner and the key can be seen. There is an antenna positioner from Yaesu, a G-450A model which helps me turning the 3 element ASAY beam for 14, 21 and 28 MHz. Talking about antennas there is more: an R7 from Cushcraft, an ALAN for 2m and a W3DZZ for lower bands (80 and 40m).

I shall not forget the computer which helps me a lot: a Pentium 4/1.5GHz stuffed with all kind of hardware and software

There are some extra gadgets which I would like to mention: the HF mobile antenna from Hustler which brings me in all the classic bands, a Standard C256 2m amplifier for packet radio usage back home, a MFJ G5RV antenna and not to forget, a Mitac Celeron laptop, 400MHz...

Here comes me for the picture now

Plus you can have a detail of my 990 for a closer look and yes, again me.

Liviu, YO3DLL