
             UNIDEN/BEARCAT 200/205XLT TEST MODE

                    by Bob Parnass, AJ9S

According to the Uniden/Bearcat 200/205XLT Service  Informa-
tion Manual, the following procedure will load channels 1-25
with various test frequencies, and zero  the  remaining  175
channels:

  1.  Press and hold  three  keys:  2,  9,  and  MAN  simul-
      taneously and turn the power switch on.

  2.  Set the power switch to the off position.

  3.  Repress and again hold three  keys:  2,  9,  and  SCAN
      simultaneously and turn the power switch on.

Some of the frequencies will be out of range, like 108.5 and
66.45 MHz, but will not permit reception.

Bob Parnass AJ9S
via WA8BXN PBBS

