Digipan 2.0 by Ernie Mills, WM2U. Please print this article and use it as a hand out at Club talks and lectures |
<TX>
Places DigiPan in Transmit mode <RX> Places DigiPan in Receive mode <CALL> The remote station's call <MYCALL> The Call entered in DigiPan's Personal Data dialog <MYNAME> The Name entered in DigiPan's Personal Data dialog <NAME> The Name of the remote station <MYQTH> The QTH entered in DigiPan's Personal Data dialog <QTH> The QTH of the other station <RXANDCLEAR> Places DigiPan in Receive mode and clears the TX window <CLEARWINDOW> Clears the contents of the window with the blinking cursor <FILE> Opens a dialog to send a text file <TIME> Enters the time of day <DATE> Enters the current date <AFC> Toggles the AFC function <SQUELCH> Toggles the Squelch function <SNAP> Toggles the Snap function <AFCON> Switch AFC on <AFCOFF> Switch AFC off <CWID> Sends the Call entered in Personal Data in morse code <RST> RST for other station <MYRST> Your RST <CR> Send Carriage Return symbol <LF> Send Line Feed symbol <CRLF> Send both CR and LF <VER> Insert DigiPan version number <SNAPON> Switch SNAP on <SNAPOFF> Switch SNAP off <VOLUME> Set soundcard volume <TUNE> Provides a full-power carrier for tuning a transmitter <IMD> Reports the last saved received IMD reading <SEEKLEFT> Searches for next station to the left <SEEKRIGHT> Searches for next station to the right <SQUELCHON> Set squelch on <SQUELCHOFF> Set squelch off <BOOKMARK> Places or removes a bookmark at the spectrum cursor <TXTOGGLE> Toggles between TX and RX <STARTSCAN> Starts frequency scanning <STOPSCAN> Halts frequency scanning <CLEARA> Clears the contents of the top RX screen <CLEARB> Clears the contents of the bottom RX screen <CLEARTX> Clears the contents of the TX screen <LOGBAR> Displays or hides the Log Bar <PHASE> Displays or hides the Phase Scope <STARTSCAN> Starts the scan mode <STOPSCAN> Stops the scan mode <SAVEQSO> Save the QSO data to the log <LOCKTX> Lock the TX frequency at the cursor <UNLOCKTX> Unlock the TX frequency <LOCKTXTOGGLE> Lock/unlock the TX frequency <SWAP> Swap the active TX channel between Channel A and Channel B <Dual> Toggles Single/Dual channels |