From: Liang, Hongbo ([email protected])
Date: Mon Feb 05 2001 - 13:42:17 PST
Hi gurus:
We met microphonics problem with our frequency source design. I think there
might be experts
out there.
Here's our situation: we have four different sources on one FR4 board. Named TX
PLL, RX PLL,
TX SYNTHESIZER, RX SYNTHESIZER. The TX and RX used different references.
We could isolate the microphonics problem with TX PLL, which is 2.6GHz. The RX
PLL uses almost the
same design as TX PLL and has no problem. Only different is the RX is 1.7GHz.
Both of them use VCO.
My question as: what's the physics behind microphonics? What're the roots of it?
Wish someone out there could enlightened me.
Best Regards,
Hongbo Liang
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:48 PDT