From: Doug Brooks ([email protected])
Date: Fri Feb 02 2001 - 14:16:48 PST
There is a note on the UltraCAD web site that warns this file is needed and
may not already be installed on your system. It is available on the
UltraCAD web site for just this purpose. You could/should have downloaded
it at the same time.
Doug Brooks
At 03:40 PM 2/2/01 -0500, Greim, Michael wrote:
>Hi,
>
>I unzipped the pcbtemp freeware from ultracad,
>but when I execute, I get a file error of
>can not find vbrun300.dll. I am trying to run
>under winnt 4.0.
>
>Any ideas? Anybody? Anybody?
>
>Best Regards,
>
>Michael C. Greim Sonus Networks
>[email protected] 978-589-8336
>
>Making the world safe for digital signals everywhere
>
>And all this science I don't understand
>It's just my job six days a week
>
>The time is gone. The email's over
>Thought I'd something more to say......
>
>
>-----Original Message-----
>From: [email protected] [mailto:[email protected]]
>Sent: Thursday, February 01, 2001 5:30 PM
>To: [email protected]; [email protected];
>[email protected]
>Subject: Re: [SI-LIST] : via current carrying capacity
>
>
>Hi all,
>
>You can also get some pretty quick results form these following sites:
>
>http://www.geocities.com/CapeCanaveral/Lab/9643/TraceWidth.htm
>http://www.aracnet.com/~gpatrick
>http://www.ultracad.com (download the Windoze GUI)
>
>:0
>
>Mitch
>_____________________________________________________________
>Tired of limited space on Yahoo and Hotmail?
>Free 100 Meg email account available at http://www.dacafe.com
>
>
>
>**** To unsubscribe from si-list or si-list-digest: send e-mail to
>[email protected]. In the BODY of message put: UNSUBSCRIBE
>si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
>si-list archives are accessible at http://www.qsl.net/wb6tpu
>****
>
>**** To unsubscribe from si-list or si-list-digest: send e-mail to
>[email protected]. In the BODY of message put: UNSUBSCRIBE
>si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
>si-list archives are accessible at http://www.qsl.net/wb6tpu
>****
.
************************************************************
Doug Brooks' book "Electrical Engineering for the Non-Degreed
Engineer" is now available. See our web site for details.
.
Doug Brooks, President [email protected]
UltraCAD Design, Inc. http://www.ultracad.com
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:48 PDT