From: Greim, Michael ([email protected])
Date: Fri Feb 02 2001 - 12:40:21 PST
Hi,
I unzipped the pcbtemp freeware from ultracad,
but when I execute, I get a file error of
can not find vbrun300.dll. I am trying to run
under winnt 4.0.
Any ideas? Anybody? Anybody?
Best Regards,
Michael C. Greim Sonus Networks
[email protected] 978-589-8336
Making the world safe for digital signals everywhere
And all this science I don't understand
It's just my job six days a week
The time is gone. The email's over
Thought I'd something more to say......
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Thursday, February 01, 2001 5:30 PM
To: [email protected]; [email protected];
[email protected]
Subject: Re: [SI-LIST] : via current carrying capacity
Hi all,
You can also get some pretty quick results form these following sites:
http://www.geocities.com/CapeCanaveral/Lab/9643/TraceWidth.htm
http://www.aracnet.com/~gpatrick
http://www.ultracad.com (download the Windoze GUI)
:0
Mitch
_____________________________________________________________
Tired of limited space on Yahoo and Hotmail?
Free 100 Meg email account available at http://www.dacafe.com
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:48 PDT