From: Bhavesh Patel ([email protected])
Date: Thu Feb 01 2001 - 09:45:37 PST
Hi! In order to use the results in Specctraquest basically you have to
convert to DML format. Look up in cadence\share\pcb\signal\cds_packages.dml
there is an example for banded/ sparse matrix format. Just plop in the RLGC
values in this matrix and you can use it in Specctrquest.
Bhavesh
-----Original Message-----
From: Adrian Udenze - Sun Uk - NSUK - Signal Integrity Engineer
[mailto:[email protected]]
Sent: Wednesday, January 31, 2001 8:29 AM
To: [email protected]
Subject: [SI-LIST] : Converting Standard matrix to Banded / Sparse
Hello,
I have the RLGC results of a field solution for a cable (Solver used ANSOFT
2D)
and I'd like to use these results in Specctraquest (Cadence). The results
are in
a standard matrix format but to set up a cable model in specctraquest seems
to
require a banded / sparse matrix format.
Question: How do I translate the standard matrix format into either of these
formats for use in Spectraquest, is there an algorithm to do this?.
Thanks in advance,
-- Adrian Udenze Signal Integrity EngineerNetwork Systems Sun Microsystems Uk ltd. Trinity Court, Wokingham Road, Bracknell, Berks, RG42 1PL Tel: +44 (0)1344 316766 Fax: +44 (0)1344 300704 email: [email protected]
**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****
**** To unsubscribe from si-list or si-list-digest: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu ****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:47 PDT