[SI-LIST] : Converting Standard matrix to Banded / Sparse

From: Adrian Udenze - Sun Uk - NSUK - Signal Integrity Engineer ([email protected])
Date: Wed Jan 31 2001 - 08:28:58 PST

• Next message: carlos moll: "Re: [SI-LIST] : SI tool for signals above 1GHz"
• Previous message: WANG,LIN-WL (A-Singapore,ex3): "[SI-LIST] : SI tool for signals above 1GHz"
• Next in thread: Bhavesh Patel: "RE: [SI-LIST] : Converting Standard matrix to Banded / Sparse"
• Maybe reply: Bhavesh Patel: "RE: [SI-LIST] : Converting Standard matrix to Banded / Sparse"

Hello,
I have the RLGC results of a field solution for a cable (Solver used ANSOFT 2D)
and I'd like to use these results in Specctraquest (Cadence). The results are in
a standard matrix format but to set up a cable model in specctraquest seems to
require a banded / sparse matrix format.
Question: How do I translate the standard matrix format into either of these
formats for use in Spectraquest, is there an algorithm to do this?.

Thanks in advance,

--
Adrian Udenze
Signal Integrity Engineer
Network Systems
Sun Microsystems Uk ltd.
Trinity Court, Wokingham Road,
Bracknell, Berks, RG42 1PL
	
Tel:	+44 (0)1344 316766
Fax:	+44 (0)1344 300704
email:	[email protected]
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at  http://www.qsl.net/wb6tpu
****

• Next message: carlos moll: "Re: [SI-LIST] : SI tool for signals above 1GHz"
• Previous message: WANG,LIN-WL (A-Singapore,ex3): "[SI-LIST] : SI tool for signals above 1GHz"
• Next in thread: Bhavesh Patel: "RE: [SI-LIST] : Converting Standard matrix to Banded / Sparse"
• Maybe reply: Bhavesh Patel: "RE: [SI-LIST] : Converting Standard matrix to Banded / Sparse"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:47 PDT