[SI-LIST] : Test Interface board routing - Diff vs. Single

About this list Date view Thread view Subject view Author view

From: Graham, David ([email protected])
Date: Mon Jan 29 2001 - 09:02:29 PST


All,

In the ATE environment where we have a certain amount of control over the
environment the signals travel in does differential signal routing have any
advantage over single trace routing (no coupling between traces, just
coupling
from trace to ground plane)? Or are they considered to be of equal benefit
in
such a controlled environment?

Thanks, David Graham
 
phone (214)480-3155
fax (214)480-2264
pager (972)598-7348
e-mail [email protected]

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:46 PDT