From: Sean Murray ([email protected])
Date: Fri Dec 01 2000 - 10:28:09 PST
Actually, have to do it internally, and using stripline it's about
impossible when you only have .236 to work with.
-----Original Message-----
From: Ray Anderson [mailto:[email protected]]
Sent: Friday, December 01, 2000 11:22 AM
To: [email protected]; [email protected]
Subject: Re: [SI-LIST] : 200 ohms
Not sure what you are trying to do, but if you go microstrip,
a 4 mil wide trace on a 250 mil thick FR4 substrate will give
you about 200 ohms impedance. (according to apsim RLGC)
-Ray
>
> Anyone able to achieve 200 ohms on .250 thick board before? If not what is
> the closest achievable board impedance within reason?
>
> Sean Murray
> General Manager
>
> M&M Specialties, Inc.
> 1236 W. Southern Ave. #106
> Tempe, AZ 85282
> 1-800-892-8760 x105
>
> www.mmspec.com
>
>
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:20 PDT